CK-VCR24II
Resolution : B/W - more than 330 Horizontal TV lines
Colour - more than 240 Horizontal TV lines
Video recording system : 4 rotary single crystal heads
Audio control : 1 stationary head
Recording speeds : 3, 12, 24 hours
Audio recording : 3, 12, 24 hours mode
Tape format : VHS 1/2” width high density video cassette
tape
Scanning system : CCIR or PAL
Power requirements : 100 ~ 230 Vac, 50/60 Hz, 20 W
S/N Ratio : Better than 42 dB
Operational temperature: 5ºC ~ 40ºC
Dimensions : 93 x 425 x 315 mm (HxWxD)
Weight : 4.5 kg
IV-4M COLOUR DISPLAY
The IntelliVision IV-4M LCD monitor is an innovative design and
provides a unique solution for surveillance monitoring systems. With
its built-in automatic sequential switcher colour and B/W cameras
can be connected in combinations. Pictures are displayed full screen
on the monitor one by one (according to the dwell time) or
continuously displays a selected camera. Alarm handling and video
signal loss sensing are powerful features inherent with this monitor.
CK-IV-4M
Scanning system : CCIR or PAL
Tube size : 10 cm diagonally
measured
Power requirements : 12 Vdc ( 1.5 Vdc,
6.75 W
Resolution : 383 (H) x 234 (V)
pixels
Operational temperature: 0°C ~ +50°C
Dimensions : 129 x 216 x 157 mm (HxWxD)
Video inputs : 4
Video outputs : 2 (identical video signals)
Video signal : 1 Vpp, 75 Ohm
Bandwidth : 20 MHz, -3 dB
Loop through inputs : no
S/N Ratio : 55 dB
S
MOKE
D
ETECTION
2151E LOW PROFILE PHOTOELECTRIC SMOKE DETECTOR
The 2151E photoelectric smoke detectors use state-of-the art optical
sensing chambers and can only be used with compatible panels. The
ability to plug these detectors into different base options extends
panel compatibility and application flexibility. The 2151E has remote
LED annunciator capability as well as two integral LEDs to provide
local visible indication of sensor status.
CK-2151E
Operating voltage : 8.5 ~ 15 Vdc
(with B412NL base)
Standby current : 75µA.
Operating temperature : -10°C ~ 60°C.
Operating humidity : 10% ~ 93%
relative humidity,
non-condensing
Latching alarm : reset by momentary power interruption
Built-in test switch : the detector can be tested by activating an
internal reed switch with a test magnet
Tamper-resistant : the 2151E includes a tamper resistant
feature that prevents removal from the
base without the use of a tool
Dimensions : 43 mm high (installed in base) x 102 mm
diameter
Weight : 102 g
B412NL NON- LATCHING RELAY BASE FOR USE IN 12 VDC
SECURITY SYSTEMS
The B412NL base is intended for use in 2-wire or 4-wire 12 Vdc
security systems where an alarm condition is signalled to the panels
by a single pole changeover contact switching state in alarm. The
base self-resets from alarm by periodically removing power from itself
and subsequently monitoring the alarm condition.
CK-B412NL
Designed for use in : 12 Vdc security
systems
Standby current : 20 µA max.
(detector not
included)
Alarm rating : 45 mA @ 12 Vdc
Changeover : rated 1 A @
30 Vdc resistive load relay contacts
Size : 29 mm high x 127 mm diameter
15
(8 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern